
Name & Signs
A high-impact embellishment that adds vibrant colors and a bold, 3D dimensional look to logos and typography. Perfect for custom nameplates and brand signage that demand attention.

Home / Patches / Metflex Patches
Bulk: as low as $0.55+ ea
Thin, lightweight Metflex with metallic or full-color finishes for caps, sportswear, outerwear, and accessories.
Low MOQs are available for most constructions. Exact minimums depend on size, backing and finish—start a quote for a precise answer.
Iron-on for apparel, sew-on for heavy jackets, Velcro for removable tactical use, and peel-and-stick for temporary applications.
Yes—we’ll email a picture of a real sample before we start production so you can confirm the look.
Most orders ship in about 5–10 days, depending on construction and volume. Ask for an estimate when you quote.
Yes, Metflex and TPU metallic patches can be heat-sealed if they feature a heat-activated backing. Because metallic and flexible resin patches are heat-sensitive, using the correct temperature and pressing from the rear or bottom is critical to avoid melting the metallic surface. Heat Sensitivity Warning Never apply direct heat to the top decorative surface of a Metflex metallic patch without a protective barrier or bottom heat source. Direct exposure to a hot upper platen can distort the metallic sheen or melt the flexible resin finish. Heat-Seal Application Process Pre-Heat Garment: Place your garment under the press for 3 to 5 seconds at to (–) to remove wrinkles and surface moisture. (Verify: Garment surface is flat, warm, and dry.) Position the Patch: Align your Metflex patch with the adhesive side facing down onto the fabric. Secure it in place with heat-resistant tape. (Verify: Patch is straight and aligned properly.) Press from Behind (Recommended): Flip the garment inside out or use a bottom-heated press. Apply low-to-medium pressure at – (–) for 10 to 15 seconds. If pressing from the top: Cover the patch with a 1/8" silicone pad or thick Teflon sheet and press with light-to-medium pressure for 10 to 12 seconds. Cool & Set: Allow the patch to cool completely for 1 to 2 minutes before handling or testing the edges. (Verify: Adhesive is firm and the edges do not lift when lightly tugged.)
To maintain the metallic sheen, flexible structure, and adhesive bond of Metflex patches, follow these care guidelines: Washing: Turn the garment inside out before washing. Machine wash on a gentle or delicate cycle using cold or warm water (up to 90°F / 30°C) with a mild detergent. Avoid Harsh Chemicals: Do not use bleach, fabric softeners, or harsh stain removers, as these can degrade the metallic foil finish and weaken the adhesive backing. Drying: Air drying or line drying is strongly recommended. If using a tumble dryer, select a low-heat or delicate setting to prevent thermal distortion of the patch. Ironing: Never apply a hot household iron directly to the surface of a Metflex patch. If ironing the surrounding garment is necessary, turn the garment inside out and iron from the reverse side using a low heat setting. Dry Cleaning: Do not dry clean garments with heat-sealed Metflex patches, as dry cleaning solvents can dissolve the heat-seal adhesive.
We offer Metflex patches in sizes ranging from an 1 inch up to 6 inches wide. This wide range makes them ideal for subtle branding on cap fronts and sleeves, as well as prominent metallic emblems for outerwear, bags, and high-end sportswear.
Metflex offers total design freedom by combining vibrant color reproduction with premium metallic finishes: Vibrant Full-Color Graphics: Print complex, highly detailed designs with unlimited color options, rich gradients, and precise color matching. Metallic Finishes: Stand out with brilliant metallic shine, available in standard silvers, rich golds, and custom metallic tones for a high-end 3D finish.
Metflex provides several distinct advantages compared to traditional rubberized materials like PVC and silicone: Vibrant Metallics: Achieves a brilliant, true metallic shine in silver, gold, and custom tones that PVC and silicone cannot replicate. Thin & Flexible: Offers a lightweight, ultra-thin profile that easily conforms to curved surfaces like baseball caps, beanies, and performance sportswear without bulging. Full-Color Reproduction: Allows for unlimited color combinations, subtle gradients, and intricate graphical detail without requiring raised color borders. Sleek, Smooth Finish: Features a smooth, refined metallic surface rather than the soft, rubbery texture characteristic of PVC or silicone.
Submit Your Artwork: Send us your logo, vector design, or concept art along with your preferred dimensions, backing choice (heat-seal or pressure-sensitive adhesive), and estimated quantity. Receive Your Digital Mock-Up: Our design team creates a precise digital proof outlining your Metflex patch's metallic areas, full-color layers, dimensions, and border structure for review. Approve or Request Revisions: Review the digital proof for color accuracy, metallic sheen placement, and layout. Request any necessary adjustments or approve the proof to proceed. Physical Sample Production: Upon digital proof approval, we produce a pre-production sample to ensure exact metallic foil reflection, fine line detail, and adhesive quality. Full Production & Shipping: Once you give final approval on the sample, we manufacture your complete Metflex order on our specialized precision machinery and ship it directly to your address.
Real production samples

Analytics, heatmaps and masked recordings are enabled by default. You can change or reject optional tracking below at any time.
Analytics (including PostHog), heatmaps and masked recordings are enabled by default to help us improve your experience. You can change or disable these preferences at any time. Your choices apply to this browser. We record page interactions, device details and selected quote/coupon fields as you type, including contact information. Passwords, payment details and verification codes are excluded. Activity history is retained until explicitly erased.