登录订单查询

SAVED ON THIS DEVICE

Your quote cart (0)

Your selections save automatically. Reopen a quote to continue or submit it.

Your next idea starts here.

Choose a product on the quote page and your build will appear in this cart.

Estimates are recalculated when you reopen a quote. Quotes are submitted individually.

免费报价
Free Floating Patches

Home / Patches / Free Floating Patches

Free Floating Patches

Bulk: as low as $0.49+ ea

Soft-touch silicone patches that stay flexible outdoors.

  • Fast turnaround
  • Free proof
  • Bulk pricing
From
$0.49+ ea
Proof
Free / ~12 hours
Backing
Sew-on, iron-on, peel & stick, Velcro

Custom Silicone Patches styles

Silicon patches

Silicon patches

Enjoy versatility with our custom silicone patches. Sleeker than PVC, they offer effortless iron-on backing and work perfectly for basic to moderately detailed designs.

Frequently asked questions

What is the minimum order?

Low MOQs are available for most constructions. Exact minimums depend on size, backing and finish—start a quote for a precise answer.

Which backing should I choose?

Iron-on for apparel, sew-on for heavy jackets, Velcro for removable tactical use, and peel-and-stick for temporary applications.

Can I see a sample before production?

Yes—we’ll email a picture of a real sample before we start production so you can confirm the look.

How long does production take?

Most orders ship in about 5–10 days, depending on construction and volume. Ask for an estimate when you quote.

What's the contrast between silicone and PVC patches?

While both silicone and PVC patches offer strength and pliability, each provides distinct characteristics: Silicone Patches: Light, pliable, and showcase a sleek, elevated surface. They excel at straightforward artwork and multi-piece connected logos. Silicone patches also apply seamlessly via heat-press compared to PVC. PVC Patches: Sturdier and denser, allowing them to capture complex details and fine-lined imagery. PVC patches need thermal bonding applied directly from behind.

What size options do you have for silicone patches?

Our custom silicone patches span anywhere from 1" up to 9" across.

How do I fix or troubleshoot silicone heat-seal patches that are not sticking properly to the fabric?

When silicone patches fail to adhere, the issue almost always traces back to insufficient heat reaching the backing adhesive, lack of pressure, or fabric surface coatings. Because silicone acts as a heat insulator, standard pressing techniques from the front often fail. Here is how to diagnose and resolve poor adhesion step by step. Troubleshooting Matrix Problem Area Root Cause Solution Edges lifting or peeling Adhesive did not melt fully; heat was blocked by silicone. Flip garment inside out and apply heat directly to the back of the fabric for 15–20 seconds with firm pressure. Patch peels off after cooling Pressure was too light, or adhesive didn't integrate into fabric fibers. Increase press pressure to Medium-High (50 PSI). Avoid soft surfaces (like ironing boards); use a hard flat table. Patch won't stick at all Fabric has waterproof/silicone coatings, or uses heat-sensitive synthetic fibers. Test an un-coated cotton fabric. For coated fabrics, switch to a low-temp adhesive or stitch around the perimeter. Adhesive oozing out sides Temperature was too high or time was too long. Drop heat by 10°F–15°F and reduce duration by 3–5 seconds. Step-by-Step Fix for Loose Patches Re-Heat From the Back (Back-Heating Method) Turn the garment inside out. Apply direct heat to the backside of the fabric directly under the patch at 310°F – 320°F (155°C – 160°C) for 15 to 20 seconds. Why this works: Silicone shields heat from the top, preventing the glue from reaching melting temperature. Heating from behind transfers thermal energy straight to the adhesive layer. Increase Physical Downward Pressure If using a home iron, place the garment on a hard, solid surface (like a wooden table or cutting board covered with a thin towel) rather than a padded ironing board. Lean your full body weight directly onto the iron without sliding it around. Allow a Full Cold Peel/Cooling Period Do not touch, flex, or test the edges of the patch while it is warm. Thermal adhesives rely on cooling to lock into the fabric fibers. Let it rest untouched for 3 to 5 minutes. Use Fabric/Silicone Glue as a Fallback If the backing adhesive is completely compromised, apply a thin layer of specialized fabric glue (like Barge All-Purpose Cement or E6000 Fabri-Fuse) along the back of the patch, clamp or weigh it down, and let it cure for 24 hours.

How do I stitch or sew silicone patches onto garments for a permanent hold without damaging the patch?

How to Order Custom Silicone Patches Submit Artwork: Send us your design or logo. Digital Proof: Review your customized digital mockup. Refine & Approve: Request adjustments or approve the layout. Physical Sample: Inspect a sample patch for final sign-off. Production & Delivery: We manufacture and ship your full order

Real production samples

Patch Gallery

See more >>
Free Floating Patches
0111Free Floating Patches
Order here?